General Information

Important Safety Notes:

• Check the inside of the larger pieces in your box for other materials packed inside
• When assembling components, place on a non-abrasive surface (i.e., shipping box) to avoid scratching
• We recommend 2 people for a smoother assembly
• You should not need to use excessive force when assembling components

Returns:
If you wish to return your product, please contact us first — we can often help resolve the issue right away.
If a return is still necessary, it must be initiated with the retailer where the product was purchased.

Need Help or Replacement Parts?

Although great care has been taken to ensure proper packaging and handling of this product, occasional issues can occur.

If you need replacement parts, assembly assistance, or have questions about the product, our customer service team is ready to help:

• Website: https://parts.nychbrands.com
• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196

Customer service agents are available 9am–5pm EST, Monday–Friday.

For Quick Assistance:

• Have reference item number ZP19008
• Provide the specific part name
• Include the batch lot number found on the end of the box

Detailed Dimensions & Specifications

Product Specifications:

• Overall Dimensions: 36½" W x 45½" H
• Height to Top Rail: 43"
• Below Ground Depth: 12"
• Space Between Pickets: 1"
• Ground to Bottom Rail: 2⅝"

A — Post (4)

⅞" x 1½" x 45"

B — Picket (28)

¼" x 1¼" x 40"

C — Top and Bottom Rail (4)

1½" x ½" x 36½"

D — Middle Rail (2)

1½" x 1½" x 36½"

E — Post Anchor (4)

¾" x 1¼" x 16"

F — Post Cap (4)

G — Rail Cap (12)

(6 installed, 6 loose)

H — ⅛" Steel Drill Bit (1)

I — Joiner Clip (4)

J — ¾" Self-Drilling Stainless Steel Screw (36) — Bag A

Power Drill with Phillips Bit

Level

Measurement Tools

Optional: Mallet

Optional: Wood Block

• Assemble on box or other smooth surface
• Gather (1) Top and Bottom Rail (C), and (1) Middle Rail (D)

Note: Middle Rail (D) has pre-routed holes on top and bottom

• Slide Top and Bottom Rail (C) along Posts (A) towards top tabs
• Slide Middle Rail (D) towards pre-drillled holes in middle of Posts (A)
• Make sure that all pre-drilled holes on rails and posts are aligned

• Secure frame using (4) ¾" Self-Drilling Stainless Steel Screws (J)
• Flip panel and repeat on other side

• Insert 14 Pickets (B) into Middle Rail (D) and Top and Bottom Rail (C)

• Slide second Top and Bottom Rail (C) over posts at bottom of frame

• Insert (2) Post Anchors (E) over bottom of posts
• Make sure pre-drilled holes on anchors and posts align

• Install (2) ¾" Self-Drilling Stainless Steel Screws (J) through aligned holes

• Secure Top and Bottom Rail (C) to posts using (2) ¾" Self-Drilling Stainless Steel Screws (J)
• (Optional): Use ⅛" Steel Drill Bit (H) to pre-drill through the post anchor
• Flip panel and repeat on other side using (2) ¾" Self-Drilling Stainless Steel Screws (J)

• Install 3 Rail Caps (G) on rails

• Repeat the steps to build second panel using remaining parts

• Attempt to push the unit into the ground; bottom rail should be 4" above ground
• Watch this video to see a demonstration

• Tap posts using scrap wood block for protection
• Check straightness with level

If Ground is Too Hard:

• Option 1: Loosen ground and soak with water

• Option 2: Use 1.5" Tulip Auger Drill Attachment

• Connect the two panels using (2) Joiner Clips (I) and (4) ¾" Self-Drilling Stainless Steel Screws (J)

• Install 4 Post Caps (F) on top of all posts

• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196
• Text: 980-580-6508