General Information

Important Safety Notes:

• Assemble the product on a flat, non-abrasive surface.
• We recommend two people for a smoother assembly experience.
• Use appropriate tools and safety equipment during installation.
• Do not use excessive force when assembling components.

Returns:
If you wish to return your product, please contact us first — we can often help resolve the issue right away.
If a return is still necessary, it must be initiated with the retailer where the product was purchased.

Need Help or Replacement Parts?

Although great care has been taken to ensure proper packaging and handling of this product, occasional issues can occur.

If you need replacement parts, assembly assistance, or have questions about the product, our customer service team is ready to help:

• Website: https://parts.nychbrands.com
• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196

Customer service agents are available 9am–5pm EST, Monday–Friday.

For Quick Assistance:

• Have reference item number EC18041
• Provide the specific part name
• Include the batch lot number found on the end of the box

Detailed Dimensions & Specifications

Product Specifications:

• Overall size: 48" H × 60" W
• Ground insert depth: 10 ½ in
• Panel width: 60 in
• Panel height: 48 in

A — Middle Post (1)

1 ½" × ⅞" × 48"

B — Left Post (1)

1 ¾" × 1 ¾" × 48"

C — Right Post (1)

1 ¾" × 1 ¾" × 48"

D — Top Rail (1)

1 ½" × ⅞" × 56 ¼"

E — Slat (15)

2 ¾" × ⅜" × 59 ⅞"

F — Bottom Rail (1)

1 ½" × ⅞" × 59 ⅞"

G — 1 ½" Self-Drilling Steel Screw (15)

H — ¾" Self-Drilling Steel Screw (8)

I — Joiner Clip (2)

J — Anchor (2)

1 ⅝" × 1 ⅝" × 14 ¾"

Note: Check inside your posts B & C for anchors

• Fully remove Anchors (J) from Posts C & D.
• Set them to the side as you will need them for Step 11.

• Push Post (B) against a wall for stability; insert Rails (D & F) and Slats (E) into post.

• Attempt to push the unit into the ground

Click here to see a video demonstration.

• Tap posts using scrap wood block for protection.
• Check straightness with a level.

If Ground is Too Hard:

• Loosen ground and soak with water.
• Or use a 1.5in tulip auger drill attachment.

• After you build your second panel, fasten panels together using provided Joiner Clips (I).

• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196
• Text: 980-580-6508