Premium Vinyl Privacy Screen

Important Safety Notes:

• Check the inside of the larger pieces in your box for other materials packed inside.
• When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching.
• We recommend an area approximately 5' x 8' for unobstructed assembling.
• You should not need to use excessive force when assembling components.

Returns: If for some reason you need to return this product, please allow us to help resolve your issues first. If you still decide to return the product, you will need to initiate the return from the company you originally purchased from.

If you need replacement parts, assembly assistance, or have questions, we are ready to help:

• Website: https://parts.nychbrands.com
• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196

Customer service agents are available 9am–5pm EST, Monday–Friday.

For Quick Assistance:

• Have reference item number ZP19014 ready.
• Provide the specific part name.
• Include the batch lot number stamped on the end of the box.

A — Post Cap (3)

B — Spacer (2)

C — Center Post (1)

3" x 3" x 47½"

D — End Post (2)

3" x 3" x 47½"

E — Board Wall (8)

⅞" x 11" x 44"

F — Ground Stake (3)

G — 2½" Self-Drilling Stainless Steel Screw (19)

D × 1

• Assemble on box or other smooth surface

E × 1

B × 2

• Use spacers to set height of bottom board

C × 1

• Use wall to hold boards in opposite post during installation.
• Align holes as shown.

E × 1

G × 4

E × 3

G × 4

E × 3

D × 2

G × 4

B × 2

• Use spacers to set height of bottom board.

E × 3

G × 4

• Attempt to push the stake into the ground. Click here for a video demonstration

• Tap ground stake using a scrap wood block for protection.

• If ground is too hard: loosen ground and soak with water, or use a 1½" Tulip Auger Drill Attachment.

G × 2

G × 1

A × 3

• Purchase surface mounting hardware separately

• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196
• Text: 980-580-6508