6 ft Surface-Mounted Wood Privacy Screen Panel

Important Safety Notes:

• Check the inside of the larger pieces in your box for other materials packed inside.
• When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching.
• We recommend 2 people for a smoother assembly.
• You should not need to use excessive force when assembling components.

Returns:

If you wish to return your product, please contact us first — we can often help resolve the issue right away. If a return is still necessary, it must be initiated with the retailer where the product was purchased.

If you need replacement parts, assembly assistance, or have questions about the product, our customer service team is ready to help:

• Website: https://parts.nychbrands.com
• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196

Customer service agents are available 9am–5pm EST, Monday–Friday.

For Quick Assistance:

• Have reference item number EC18047
• Provide the specific part name
• Include the batch lot number found on the end of the box

A — Left Post (1)

1¾" x 1¾" x 72⅞"

B — Right Post (1)

1¾" x 1¾" x 72⅞"

C — Wooden Slats (15)

⅝" x 4½" x 47¼"

D — Top Board (1)

⅝" x 4½" x 47¼"

E — Wooden Spacer (2)

F — Post Cap (2)

G — Screws (8)

1" Self-Drilling Stainless Steel

Deck Mount

Patio Mount

Deck Install

Purchase separately if installing your screen on a deck.

Power Drill

¼″ Wood Drill Bit

¼″ Lag Screws 3″ Long (4)

Matching Driver Bit

Patio Install

Purchase separately if installing your screen on a patio.

Hammer Drill

¼″ Concrete Drill Bit

Hammer

¼″ Concrete Wedge Anchor 2¼″ Long (4) w/ Wrench

We recommend 2 people during the whole assembly for a smoother process.

A × 1

B × 1

• Assemble on box or other smooth surface to prevent scratching.

C × 1

E × 2

• Align board channel with post fin.
• Ensure that the wooden spacers (E) are flush with the bottom of your posts.

C × 1

• Place slat (C) at the top of your screen to make square.
• Ensure that slat (C) is pushed flush against the wooden spacer (E).

G × 2

• Push on the sides of your posts (A & B) to make square.

C × 1

• Slide slat (C) down.
• Remove temporary Wooden Spacer (E).
• Stand screen.

C × 13

D × 1

G × 2

G × 4

F × 2

• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196
• Text: 980-580-6508

Step 1

Step 2

• Refer to mounting hardware instructions to ensure proper installation.
• Surface mounting hardware is not included.

• If mounting to deck boards only, a support block should be added underneath.

Step 3

Step 1

Step 2

• Refer to mounting hardware instructions to ensure proper installation.
• Surface mounting hardware is not included.

• If mounting to deck boards only, a support block should be added underneath.

Step 3

Step 4

Step 5