6ft Florence Screen Kit

Important Safety Notes:

• Check the inside of the larger pieces in your box for other materials packed inside.
• When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching.
• We recommend an area approximately 5' x 8' for unobstructed assembling.
• You should not need to use excessive force when assembling components.

Returns:
If you wish to return your product, please contact us first — we can often help resolve the issue right away.
If a return is still necessary, it must be initiated with the retailer where the product was purchased.

Need Help or Replacement Parts?

If you need replacement parts, assembly assistance, or have questions about the product, our customer service team is ready to help:

• Website: https://parts.nychbrands.com
• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196

Customer service agents are available 9am–5pm EST, Monday–Friday.

For Quick Assistance:

• Have reference item number EC18024/EC18025
• Provide the specific part name
• Include the batch lot number found on the end of the box

Note: For best plant growth, it is recommended to drill (2) ¾" diameter drainage holes in the floor board roughly 12" apart.

Power Drill with Phillips Bit is highly recommended for product assembly

Optional But Recommended to Avoid Tipping

• Recommended for high wind environments
• Surface mounting screws not included

Dirt:

• ¾" Rebar (2)
• Hammer

Deck:

• Power Drill
• Wood Drill Bit
• ¼" Lag Screws 3" Length (4)
• Matching Driver Bit

Patio:

• Hammer Drill
• Concrete Drill Bit
• ¼" Concrete Screws 2¼" Length (4)
• Matching Driver Bit

A — Planter Long Board (2)

⅞" x 11" x 44"

B — Planter Short Board (2)

⅞" x 11" x 11"

C — Floor Supports (3)

⅞" x 1½" x 12¾"

D — Front Post (2)

1⅞" x 1⅞" x 11"

E — Back Left Post (1)

1⅞" x 1⅞" x 11"

F — Back Right Post (1)

1⅞" x 1⅞" x 11"

G — Floor (1)

⅞" x 11" x 44"

H — Left Post - Long (1)

1" x 1⅞" x 61"

I — Right Post - Long (1)

1" x 1⅞" x 61"

J — Wide Board (8)

⅞" x 3" x 44"

K — Narrow Board (14)

⅞" x 1½" x 44"

L — Top Post Cap (2)

M — Corner Post Cap (2)

N — Spacer (44)

O — ¾" Self-Drilling Stainless Steel Screw (28)

P — Galvanized Steel L Bracket (2)

Q — ⅛" Drill Bit (1)

A × 1

• Assemble on box or other smooth surface to prevent scratching.
• Place board with channel facing up.

E × 1

F × 1

C × 3

• Carefully set this portion aside until Step 5.

A × 1

D × 2

• Ensure capped end of post faces down as shown.

B × 2

O × 16

H × 1

I × 1

O × 4

J × 1

N × 2

• Align tab with notch on spacer.

J × 7

K × 14

N × 42

• Repeat step 11, following the pattern shown below.

O × 4

L × 2

M × 2

G × 1

• Note: For best plant growth, it is recommended to drill (2) ¾" diameter drainage holes in part (G) roughly 12" apart.

Optional But Recommended to Avoid Tipping

• Recommended for high wind environments
• Surface mounting screws not included

Dirt:

• ¾" Rebar (2)
• Hammer

Deck:

• Power Drill
• Wood Drill Bit
• ¼" Lag Screws 3" Length (4)
• Matching Driver Bit

Patio:

• Hammer Drill
• Concrete Drill Bit
• ¼" Concrete Screws 2¼" Length (4)
• Matching Driver Bit

• Recommended if installing into high wind environment.

• Recommended if installing into high wind environment.
• Surface mounting screws not included.

• Re-install removed screw.

• Drill and install mounting screws according to instructions on screw packaging.

• Repeat steps for left post.

• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196
• Text: 980-580-6508