EC18040 4ft Concord Wood Privacy Planter

General Information

Important Safety Notes:

• Check the inside of the larger pieces in your box for other materials packed inside
• When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching
• We recommend an area approximately 5'x 8' for unobstructed assembling
• You should not need to use excessive force when assembling components

Returns:
If you wish to return your product, please contact us first — we can often help resolve the issue right away.
If a return is still necessary, it must be initiated with the retailer where the product was purchased.

Need Help or Replacement Parts?

If you need replacement parts, assembly assistance, or have questions, our customer service team is ready to help:

• Website: https://parts.nychbrands.com
• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196

Customer service is available 9am–5pm EST, Monday–Friday.

For Quick Assistance:

• Reference item number EC18040
• Provide the part name
• Include the batch lot number (found on he end of the box)

Planter Depth: 9 1/4"

Planter Volume: 3.5 cubic ft

A- Left Post (1)

2⅛″ × 2⅛″ × 49¼″

B- Right Post (1)

2⅛″ × 2⅛″ × 49¼″

C (BRD082)- Board (6)

⅝″ × 4½″ × 38¼″

D- Corner Post (2)

2⅛″ × 2⅛″ × 13¾″

E (BRD074)- Planter Floor Support Board (2)

1¾″ × 4½″ × 38¼″

F (BRD076)- Planter Long Top Boards (2)

⅝″ × 4½″ × 38¼″

G (BRD075)- Planter Long Boards (3)

⅝″ × 4½″ × 38¼″

H (BRD103)- Planter Short Top Boards (2)

⅝″ × 4½″ × 16″

I (BRD102)- Planter Short Boards (4)

⅝″ × 4½″ × 16″

J (BRD104)- Floor Boards (6)

⅝″ × 4½″ × 16⅝″

K (BRD105)- Middle Floor Board (1)

⅝″ × 2¾″ × 16⅝″

L (BRD106)- End Floor Boards (2)

⅝″ × 4½″ × 16½″

M- Screen Post Cap (2)

1¼″ × 1¼″ × ¾″

N- Planter Post Cap (6)

2¼″ × 2¼″ × ¾″

O- ⅝″ Self Drilling Screw (20)

P- 1½″ Wood Screw (4)

Q- Planter Liner (1)

R- Spacers (12)

Make sure you’re using the correct part!

Each board has a unique part code stamped on the end that matches the parts list.

• Assemble on a smooth surface to prevent scratching

• Ensure temporary Spacers (R) are flush with the bottom of the post
• Ensure Planter Floor Support Board (E) matches orientation as shown in diagram

• Remove Spacers (R) once this step is complete as you will need to reuse them

• Ensure spacers are placed under each end of the short boards

• Remove Spacers (R) once this step is complete as you will need to reuse them

• Ensure Planter Floor Support Board (E) matches orientation as shown in diagram

• Once step is complete, flip unit 90°

• Remove any remaining spacers from posts
• After inserting Planter Post Caps (N) flip unit 90° to stand it back up

• Make sure to place the first spacer on each post to start your screen.

• Rotate unit 180° once step is complete

• Please note that small gaps between floor boards are intentional to allow for proper drainage

• Ensure the End Floor Boards (L) are flush with the planter box sides before securing them with screws

• Fill planter box with soil of your choice
• Max Volume: 105 qt / 3.5 cu ft

• Email: support@encloscreens.com
• Phone: 704-892-5222 or 877-234-6196
• Text: 980-580-6508